Sandisk uSSD 5000 Manual do Utilizador Página 2

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 2
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 1
USA
Tel: +1-408-470-4440
Fax: +1-408-470-4470
Japan
Tel: +81-3-5423-8101
Fax: +81-3-5423-8102
Taiwan
Tel: +886-2-2515-2522
Fax: +886-2-2515-2295
China
Tel: :+86-755-8348-5218
Fax: +86-755-8348-5418
Korea
Tel: :+82-2-3452-9079
Fax: +82-2-3452-9145
Europe
Tel: +33-(1)-43-37-2131
Fax: +33-(1)-43-37-2111
Rest of the World & Israel
Tel: +972-9-764-5000
Fax: +972-3-548-8666
For more information, please
visit www.sandisk.com/uSSD
Speci cations
High Performance*
SLC  ash
Sustained Read 31.6 MB/sec
Sustained Write 24.8 MB/sec
MLC  ash
Sustained Read 29.9 MB/sec
Sustained Write 12.8 MB/sec
Form Factors
2x5 header, x86 internal USB standard
• Con gurations: Standard, low pro le
Electrical Speci cations
DC supply voltage: 5V (±10%)
Active mode: 150 mA (typ)
Compatibility and Certi cations
USB 2.0 interface, certi ed by the USB organization
Complies with Microsoft Vista ReadyBoost requirements
RoHS & Chinese RoHS Compliance
Wide OS Support
Microsoft XP Embedded, Microsoft Windows for Point of Service,
Microsoft Win.CE, Microsoft XP Pro, Microsoft Windows Server 2003,
Microsoft Windows Vista (ReadyBoost & Storage), and Linux
Environmental Speci cations
Operating temperature: 0°C to +70°C
Storage temperature: -55°C to +95°C
Operating altitude: up to 80,000 feet
Operating shock: 50g, 11msec, half sine
Non-operating shock: 1,500G, 0.5msec, half sine
Operating vibration: 2.17gRMS (20Hz to 2000Hz)
Non-operating vibration: 3.08gRMS (20Hz to 2000Hz)
Mechanical Speci cations
Standard: 26.65mm X 37.80mm X 10.60mm
• Low pro le: 26.65mm X 37.80mm X 6.88mm
* 1 gigabyte (GB) = 1 billion bytes; 1 megabyte (MB) = 1 million bytes; speeds based on internal testing; performance may be lower
depending on host device. Some of the listed capacity is used for formatting and other functions, and thus is not available for data
storage.
** Based on internal testing. The MTTF calculation does not take into account the disk endurance limitation. For the disk endurance,
please refer to the endurance section in the product speci cation.
SanDisk and the SanDisk logo are trademarks of SanDisk Corporation, registered in the United States and other countries. uSSD
is a trademark of SanDisk Corporation. Other brand names mentioned herein are for identi cation purposes only and may be
trademarks of their respective holder(s).
©2007 SanDisk Corporation. All rights reserved. 8/07 80-11-01469
High Reliability
• Unlimited Read cycles
Dynamic and static wear-leveling
Dynamic bad block management
• Advanced EDC/ECC
Up to 4M mean time to failure
(MTTF)** hours
Wide Capacity Range
• SLC ash: 1GB to 8GB
• MLC ash: 2GB to 8GB
Limited Warranty
• 3 years
Vista de página 1
1 2

Comentários a estes Manuais

Sem comentários