SanDisk SDSDH-512 - Ultra II Flash Memory Card Manual Página 59

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 108
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 58
SanDisk CompactFlash Card OEM Product Manual ATA Command Description
5.1.5 Identify Device–ECH
The Identify Drive command enables the host to receive parameter information from a
CompactFlash Memory Card. This command has the same protocol as the Read Sector(s)
command. The parameter words in the buffer have the arrangement and meanings defined in
Table 5-8. All reserved bits or words are “0”.
Table 5-7 Identify Device
Bit 7 6 5 4 3 2 1 0
Command (7) ECH
C/D/H (6) X X X Drive X
Cyl High (5) X
Cyl Low (4) X
Sec Num (3) X
Sec Cnt (2) X
Feature (1) X
Table 5-8 is the definition for each field in the Identify Device Information.
Table 5-8 Identify Device Information
Word
Address Default Value Total Bytes Data Field Type Information
0 848Ah 2 General configuration bit-significant
information
1 XXXXh 2 Default number of cylinders
2 0000h 2 Reserved
3 XXXXh 2 Default number of heads
4 0000h 2 Number of unformatted bytes per track
5 0000h 2 Number of unformatted bytes per sector
6 XXXXh 2 Default number of sectors per track
7-8 XXXXh 4 Number of sectors per card (Word 7 = MSW,
Word 8 = LSW)
9 0000h 2 Reserved
10-19 aaaa 20 Serial number in ASCII (right justified)
20 0000h 2 Buffer type (dual ported)
21 0000h 2 Buffer size in 512 byte increments
22 0004h 2 Number of ECC bytes passed on Read/Write
Long Commands
23-26 aaa 8 Firmware revision in ASCII (Rev M.ms) set by
code Big Endian Byte Order in Word
27-46 aaaa 40 Model number in ASCII (left justified) Big
Endian Byte Order in Word
47 000Xh 2 Maximum No. of Sectors on Read/Write Multiple
command
48 0000h 2 Double-word not supported
49
0X00h
a
2 Capabilities: DMA Supported (bit 8), LBA
supported (bit 9)
50 0000h 2 Reserved
© 2007 SanDisk Corporation 5-5 Rev. 12.0, 02/07
Vista de página 58
1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 107 108

Comentários a estes Manuais

Sem comentários