SanDisk SD032 Manual descarregar pdf (Página 2)

SanDisk

Corporation general policy does not recommend the use of its products in life support applications where in a failure

or malfunction of the product may directly threaten life or injury. Per SanDisk Terms and Conditions of Sale, the user of SanDisk

products in life support applications assumes all risk of such use and indemnifies SanDisk against all damages. See “Limited

Warranty” and “Disclaimer of Liability.”

This document is for information use only and is subject to change without prior notice. SanDisk Corporation assumes no

responsibility for any errors that may appear in this document, nor for incidental or consequential damages resulting from the

furnishing, performance or use of this material. No part of this document may be reproduced, transmitted, transcribed, stored in

a retrievable manner or translated into any language or computer language, in any form or by any means, electronic,

mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written consent of an officer of SanDisk

Corporation.

SanDisk and the SanDisk logo are registered trademarks of SanDisk Corporation.

Product names mentioned herein are for identification purposes only and may be trademarks and/or registered trademarks of

their respective companies.

SanDisk products are covered or licensed under one or more of the following U.S. Patent Nos. 5,070,032; 5,095,344; 5,168,465;

5,172,338; 5,198,380; 5,200,959; 5,268,318; 5,268,870; 5,272,669; 5,418,752; 5,602,987. Other U.S. and foreign patents

awarded and pending.

Lit. No. 80-36-00235 Rev. 1.1 11/2003 Printed in U.S.A.

Revision History

• Revision 0.9 dated 2/2003

−

initial release

• Revision 0.91 dated 3/2003

−

minor edits to text and section numbering; changed 10MB/sec in section 1.3 to 12.5MB/sec;

changed 12MB/sec to 12.5MB/sec in section 1.5.9.7; changed 25 Kbits/sec to 25 Mb/sec in section 1.5.10.6; added MLC

values to tables 2-4 and 3-9; revised footnote to table 5-5; updated sales office info.

• Revision 0.92 dated 4/2003

−

revised Table 3-9 max read current and max write current values; revised Appendix A from

Secure Digital Card order info to miniSD Card order info.

• Revision 1.0 dated 4/2003

−

Inserted values for sleep current in Table 2-3; corrected values for min and max VDD current in

Table 2-3; changed value of TRAN_SPEED from 25MHz to 25 Mb/sec; changed PRV value of 30 to 31 in Table 3-8

• Revision 1.1—Modified part numbers; minor edits to text; adjusted values for Hermon; adjusted values in Tables 2-5 & 3-9

1 2 3 4 5 6 7 ... 113 114

Sem comentários

SanDisk SD032 Manual Página 2